RED V-Raptor Plate Plus 4 Batteries/Charger Kit 150 V-mt
The v-mount kit includes four NANO Micro 147wh battery packs, one X4 quad charger, and one RED V-Raptor Sharkfin plate.
30 in stock
This V-mount kit includes four NANO Micro 147wh battery packs, one X4 quad charger, and one RED V-Raptor sharkfin/hotswap plate.
The X4 charger is a compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 2.6A charging as well a single bay per side fast charge. When only needing to charge one battery pack on each side, the rapid charge will charge the pack at 3A (one 98wh pack in under 2.5hrs). When two packs are placed on either side, the charge will charge the lesser charged pack up to the same level as the other, then charge both at 2.6A current combined.
To accompany the X4 charger are the Nano Micro packs which are quite possibly the smallest style pack on the market today. Measuring in at less than 4″ in height and 2″ in depth, while weighing a feathery 1.2 lbs., the NANO-V98 is the perfect “grab and go” pack for the majority of powering applications. Capable of handling up to a 10A load, consider these packs for lighter camera powering applications, on-board monitors, recorders, wirless tx/rx, etc.
The packs feature an on-board unregulated p-tap which can be used to power most 12vdc devices and a 5V, 3A USB, and a 4-stage LED gauge. The packs also include a 5V, 3A USB for powering/charging mobile devices, and a 4-stage LED gauge to view remaining power. Lastly, the 14.8v, 98wh capacity allows for the packs to be transported carry-on without restrictions under IATA, ICAO, and UN regulations. The packs have been UN tested and certified, passing UN38.3 certification.
The CXV-TS-VRAP connects to the v-mount of the DSMC3 Raptor to allow you to attach two V-mount battery packs(full size, mini or micro) to the rear of the camera. Different from some other plates, the all aluminum build of this plates makes it feel like part of the camera. The build quality is next level and we have added some new features on this plate we’ve never done before.
Since the Raptor outputs are found on the rear of the camera, this hotswap allows you to slide out the right side mount plate to the proper depth so as to not block the inputs and outputs of the Raptor camera. The set screw then locks the positioning in place allowing you to accommodate any size battery packs. A storage slot with magnetic hold keeps the allen key in place to reposition at any time.
Choose between discharging both battery packs at the same time equally or one and then the other. To draw from both batteries equally, switch the button to the “I I” setting. When the switch is in the “I+I” setting, it will draw power from the camera operator side battery first, and then move to the other. Either way you choose, you can still hot swap batteries to keep continuous power going to your camera and accessories. All mode changes should be done prior to camera startup. The switch is deactivated once power is being draw from the plate.
NANO Micro Specs:
Capacity: 147Wh (14.8v, 9.9Ah)
Operational Voltage: DC 12v-16.8v
Size: 2.83” x 3.93” x 2.63”
Weight: 1.55 lbs.
Normal Runtime (25W): 5.9 hours
Load: 16A peak/12A continuous
X4 Charger Specs:
Quick Charge Current: 2.6A Simultaneous
Power Range per Channel: up to 48watts/hr.(two batteries), 24watts/hr.(four batteries)
Size: 4.5” x 7.1” x 3.4”
Input Voltage: 90-240VAC 50/60Hz
RED V-Raptor Sharkfin Plate specs:
Output for camera: DC 11-17v, Unregulated Paralleled
Output for 2x P-taps: DC 11-17v, Unregulated, 7.2A max
Size: 3.6″ x 3.5″ x 3.7″
Weight: 1.2 lbs